Rebuild your site in three dimensions.
FlyPix AI is the no-code 3D surface modeling software that turns aerial, drone, and satellite imagery and LiDAR into point clouds, meshes, and DSM/DTM surfaces you can measure and compare — reconstructing entire sites and saving up to 99.7% of manual modeling time.
Modelling one surface by hand takes 997 seconds.
FlyPix AI takes 3.
A single site reconstruction can mean millions of points, dozens of overlapping captures, and hours of manual mesh cleanup. Hand modeling does not scale. FlyPix AI reconstructs and classifies the surface instantly, so your 3D model keeps pace with every new flight.
Surveyors stitch overlapping captures and clean meshes by hand, model after model. Results drift between operators, lag behind the site, and are costly to rebuild.
Up to 99.7% time saved. Consistent, georeferenced 3D surfaces you can measure, difference over time, and export straight into your GIS and CAD tools.
3D reconstruction from imagery and LiDAR, without the code.
3D surface modeling software reconstructs the shape of the ground, structures, and objects as point clouds, meshes, and elevation surfaces from overlapping imagery or LiDAR. FlyPix AI is a no-code platform that uses artificial intelligence and photogrammetry to build digital twins of sites, separate surface from terrain into DSM and DTM, and extract and measure features in 3D across aerial, drone, and satellite imagery and LiDAR. You upload your captures, label a handful of examples, and the AI engine reconstructs the surface and runs analysis across the whole site — turning hours of manual modeling into minutes of decision-ready insight.
Everything you need to model surfaces in 3D
One platform to reconstruct, classify, measure, and compare in three dimensions across every site you capture — from a single quarry face to a regional terrain model.
Point cloud reconstruction
Turn overlapping imagery and LiDAR into dense, georeferenced point clouds of the ground, structures, and objects in one pass.
Mesh & surface modeling
Build textured meshes and continuous surfaces from points for clean, watertight 3D models of any site.
DSM & DTM generation
Separate surface from bare earth to produce digital surface and digital terrain models for planning and design.
Volumetrics & differencing
Measure volumes, heights, and slopes, and difference two surfaces to see what was cut, filled, or moved.
3D feature extraction
Detect and classify structures, vegetation, and infrastructure within the point cloud, not just on a flat image.
No-code custom models
Train a detector for the exact feature you want to extract in 3D by labelling a few examples — no programming.
From raw captures to a 3D model in four steps
A no-code workflow built so surveyors, engineers, and operators — not just data scientists — can run production-grade 3D reconstruction.
Upload your captures
Bring overlapping drone, aerial, or satellite imagery and LiDAR of the site, in any common format.
Label what matters
Mark a few examples of the feature you want to reconstruct or extract in 3D. A handful is enough.
Let the AI reconstruct
FlyPix builds the point cloud, mesh, and DSM/DTM, then detects, classifies, and measures across the model.
Explore & export
Inspect the surface in 3D, take measurements, then export point clouds, meshes, and surfaces to your GIS and CAD.
One platform for every sensor in 3D
Surface modeling is more than a flat orthophoto. FlyPix AI ingests the full range of capture data — reconstruct from overlapping multispectral imagery, build dense surfaces from LiDAR returns, and fuse drone and satellite passes — all in one workspace.
See all supported formats →Built for every site-modeling team
Train models for the exact features your site cares about and get 3D reconstruction tailored to your domain.
Mining
Pits, faces & stockpiles
Construction
Earthworks & progress
Survey & mapping
Terrain & feature models
Urban planning
City & building models
Energy
Sites, towers & corridors
Water & coastal
Banks, levees & terrain
Forestry
Canopy height & volume
Defense & security
Site reconstruction
GIS & geospatial
Elevation & 3D layers
Agriculture
Field terrain & drainage
Why teams choose FlyPix AI
The platform removes the bottlenecks that slow 3D surface modeling: manual mesh cleanup, specialist headcount, rigid formats, and tooling that cannot keep pace with new flights.
Reconstruction in seconds
Build dense surfaces and extract features across a full site in seconds instead of hours of manual modeling — and repeat it on every new flight.
A true no-code platform
Surveyors and operators reconstruct and analyse 3D models on their own captures — no programming, no data-science team, no vendor queue.
Multi-sensor by design
Fuse optical, multispectral, and LiDAR captures from drone, aerial, and satellite in one workspace to build the surface you need.
Scales to any site
Model a single quarry face in fine detail or sweep an entire region at the cadence your projects demand.
What geospatial teams say
From industrial pilots to research labs to environmental missions — see how teams put FlyPix AI to work.
We ran a joint pilot with FlyPix AI in an industrial setting. We were impressed by the dedicated, easy-to-work-with team, their expertise, and how quickly they applied the technology to a novel use case.
FlyPix AI helped us go from idea to proof of concept in record time. The team was responsive, the platform was easy to integrate, and we tested geospatial insights on real property data within days.
FlyPix AI made it remarkably easy to turn drone imagery into actionable results — truly next-gen tech, delivering AI-driven analysis and cloud computing within minutes without complex setups.
What surprised us most was how effortless it was to start. The platform is robust, easy to navigate, and extremely reliable.
FlyPix AI helped us automate land-use classification with incredible precision and speed, saving months of manual work.
Working with FlyPix has significantly elevated the impact of our clean-up missions. We're proud to collaborate with a team that shares our commitment to environmental responsibility.
Turn your captures into 3D.
Create an account and reconstruct your first 3D surface in minutes — no credit card, no code. Want help scoping your workflow? Our geospatial team will set it up with you.
3D surface modeling software, answered
The questions surveyors, engineers, and operators ask before switching to AI-powered 3D reconstruction.
What is 3D surface modeling software?
Do I need coding or GIS expertise to use FlyPix AI?
How does AI 3D reconstruction work?
What imagery and data formats does FlyPix AI support?
Can FlyPix AI measure volumes and compare surfaces over time?
How much time can FlyPix AI save versus manual modeling?
Can I try FlyPix AI on my own captures?
See your site in full 3D.
Join 10,000+ users automating geospatial analysis with FlyPix AI. Upload your captures and watch the AI reconstruct, measure, and model your site in seconds.