Grade every building after the event.
FlyPix AI is the no-code building damage assessment software that turns before-and-after satellite, aerial, and drone imagery into a per-structure damage grade — collapsed, major, minor, or intact — across an entire disaster zone, saving up to 99.7% of manual inspection time.
Grading one impact zone by hand takes 997 seconds.
FlyPix AI takes 3.
A single post-event scene can hold tens of thousands of buildings that each need a damage grade. Inspecting them one by one delays relief and claims for weeks. FlyPix AI compares before-and-after imagery and grades every structure instantly, so triage keeps pace with each new capture.
Assessors compare imagery and walk streets building by building, grading damage by hand. Counts arrive late, vary between reviewers, and slow the dispatch of relief and reconstruction.
Up to 99.7% time saved. Consistent, georeferenced per-building damage grades you can track between captures and export straight into your GIS.
AI per-building damage grading, without the code.
Building damage assessment software is a tool that compares imagery captured before and after a disaster to detect every structure and grade how badly each one is damaged. FlyPix AI is a no-code platform that uses artificial intelligence to outline buildings, read roof and structural damage, and assign a grade — collapsed, major, minor, or intact — across satellite, aerial, and drone imagery. You upload your pre-event and post-event captures, label a handful of examples, and the AI engine builds a custom model and grades every building across the whole impact zone — turning days of manual inspection into minutes of decision-ready counts.
Everything you need to assess building damage
One platform to detect, compare, grade, and count across every impact zone you capture — from a single block to a whole region hit by the same event.
Per-building damage grading
Assign every structure a grade — collapsed, major, minor, or intact — in a single pass across the impact zone.
Before-and-after comparison
Align pre-event and post-event captures and surface exactly which buildings changed between the two dates.
Roof-damage detection
Read partial collapse, blown-off roofs, and debris from above to separate cosmetic damage from structural loss.
Affected-structure counts
Tally graded buildings by severity into georeferenced totals for insurance, relief, and reconstruction planning.
Rapid post-event triage
Prioritise the worst-hit blocks first so responders reach the buildings that need attention soonest.
No-code custom models
Train a grader for your building stock and event type by labelling a few examples — no programming.
From before-and-after imagery to graded buildings in four steps
A no-code workflow built so responders, insurers, and recovery teams — not just data scientists — can run production-grade assessment.
Upload before & after
Bring pre-event and post-event satellite, aerial, or drone captures of the impact zone in any common format.
Label the grades
Mark a few examples of collapsed, major, minor, and intact buildings. A handful is enough for the engine to learn.
Let the AI grade
FlyPix builds a model from your labels and detects, compares, and grades every structure across the whole zone.
Count & export
Review affected-building totals on interactive maps and dashboards, then export vector layers to your GIS.
One platform for every sensor over the impact zone
Damage assessment is more than true-colour pictures. FlyPix AI ingests the full range of remote-sensing data — read roof loss and debris with high-resolution optical imagery, measure structural collapse and height change with LiDAR, and see through cloud and smoke with SAR — all in one workspace.
See all supported formats →Built for every team responding to disaster
Train models for the exact building stock and event your mission faces and get assessment tailored to your domain.
Emergency management
Response & relief
Insurance
Claims & exposure
Government
Recovery & policy
Reconstruction
Rebuild planning
Wildfire response
Burned structures
Flood response
Inundated buildings
Humanitarian aid
Needs assessment
Risk & resilience
Exposure modelling
Aerial survey
Post-event capture
Mapping & GIS
Damage layers
Why response teams choose FlyPix AI
The platform removes the bottlenecks that slow damage assessment: manual inspection, specialist headcount, rigid formats, and counts that arrive long after relief is needed.
Triage in seconds
Grade tens of thousands of buildings across a full impact zone in seconds instead of days of manual inspection — and repeat it on every new capture.
A true no-code platform
Responders and assessors train and run AI models on their own imagery — no programming, no data-science team, no vendor queue.
Multi-sensor by design
Combine optical, LiDAR, and SAR in one workspace and pick the right sensor to see through cloud, smoke, or darkness.
Scales to any disaster
Grade a single damaged block or sweep an entire region hit by the same event at the cadence response demands.
What geospatial teams say
From industrial pilots to research labs to environmental missions — see how teams put FlyPix AI to work.
We ran a joint pilot with FlyPix AI in an industrial setting. We were impressed by the dedicated, easy-to-work-with team, their expertise, and how quickly they applied the technology to a novel use case.
FlyPix AI helped us go from idea to proof of concept in record time. The team was responsive, the platform was easy to integrate, and we tested geospatial insights on real property data within days.
FlyPix AI made it remarkably easy to turn drone imagery into actionable results — truly next-gen tech, delivering AI-driven analysis and cloud computing within minutes without complex setups.
What surprised us most was how effortless it was to start. The platform is robust, easy to navigate, and extremely reliable.
FlyPix AI helped us automate land-use classification with incredible precision and speed, saving months of manual work.
Working with FlyPix has significantly elevated the impact of our clean-up missions. We're proud to collaborate with a team that shares our commitment to environmental responsibility.
Turn before-and-after imagery into graded buildings.
Create an account and run your first AI damage assessment on an impact zone in minutes — no credit card, no code. Want help scoping your workflow? Our geospatial team will set it up with you.
Building damage assessment software, answered
The questions responders, insurers, and recovery teams ask before switching to AI-powered damage assessment.
What is building damage assessment software?
Do I need coding or GIS expertise to use FlyPix AI?
How does FlyPix AI grade per-building damage?
What imagery and data formats does FlyPix AI support?
How does before-and-after comparison work?
How much time can FlyPix AI save versus manual assessment?
Can I try FlyPix AI on my own imagery?
See which buildings the event hit hardest.
Join 10,000+ users automating image analysis with FlyPix AI. Upload your before-and-after captures and watch the AI grade every building in seconds.