Measure a project’s footprint.
FlyPix AI is the no-code environmental impact assessment software that establishes a pre-project baseline, quantifies disturbance footprint, and tracks before-during-after change across satellite, aerial, and drone imagery — turning thousands of square kilometres into permit-ready evidence and saving up to 99.7% of manual analysis time.
Quantifying one site by hand takes 997 seconds.
FlyPix AI takes 3.
A project footprint is rarely a clean line on a map — it spreads through cleared vegetation, access tracks, spoil, and silted water far beyond the fence. Measuring that disturbance by hand, scene after scene, does not scale. FlyPix AI compares baseline and impact captures automatically and quantifies every hectare affected, so your assessment keeps pace with the works on the ground.
Assessors digitise the disturbed area by hand, comparing before and after scenes plot by plot. Indirect impacts are missed, figures are inconsistent, and the report lands long after the footprint has grown.
Up to 99.7% time saved. Consistent, georeferenced footprint and change layers, dated and quantified in hectares, that you can defend in permitting and export straight into your GIS and EIA reports.
AI impact assessment for any project, without the code.
Environmental impact assessment software is a tool that measures how a project or development changes the surrounding environment — establishing a pre-project baseline, quantifying the disturbance footprint, and tracking impact over time. FlyPix AI is a no-code platform that uses artificial intelligence to map the state of land, vegetation, habitats, and water before works begin, then outline and measure every change across satellite, aerial, and drone imagery. You define your project area, and the engine fixes a baseline, compares before-during-after captures, and quantifies habitat, vegetation, and water loss — turning weeks of manual assessment into minutes of permit-ready, defensible evidence.
Everything you need to assess project impact
One platform to baseline, quantify, track, and report environmental impact across every project you deliver — from a single site to a corridor spanning regions.
Pre-project baseline
Fix a dated, georeferenced baseline of land cover, vegetation, habitat, and water before any ground is broken.
Disturbance footprint
Quantify the true footprint — cleared land, access tracks, spoil, and indirect disturbance — in hectares, not estimates.
Before-during-after change
Compare baseline, construction, and operation captures to measure exactly what the project has altered and when.
Habitat & vegetation loss
Measure vegetation removed and habitat fragmented, with affected area mapped and dated for impact reporting.
Cumulative impact
Track footprint across phases and neighbouring works to surface cumulative impact that single-snapshot reviews miss.
Permit-ready evidence
Export audit-ready footprint layers, areas, and time series as defensible evidence for permitting and compliance.
From raw imagery to impact evidence in four steps
A no-code workflow built so EIA practitioners, planners, and project teams — not just data scientists — can produce defensible impact assessments.
Set your project area
Define the project boundary and zone of influence and connect satellite, aerial, or drone captures.
Fix the baseline
Label the land cover, habitat, or feature to assess, or use a built-in model, and lock a pre-project baseline.
Let the AI quantify
FlyPix compares before-during-after captures, outlines disturbance, and measures the footprint and loss automatically.
Assess & report
Review impact on interactive maps and dashboards, then export footprint layers and reports to your GIS and EIA tools.
Assess impact through any conditions
Impact assessment cannot stall when clouds roll in or works run through winter. FlyPix AI ingests the full range of remote-sensing data — gauge vegetation and water loss with multispectral bands, see through cloud and darkness with SAR, and measure cut, fill, and terrain change with LiDAR — all in one workspace, so no disturbance goes unmeasured.
See all supported formats →Built for every project-driven team
Train models for the exact impact your assessment cares about and get footprint analysis tailored to your project.
Mining
Footprint & rehabilitation
Construction
Site disturbance
Energy
Solar, wind & pipelines
Infrastructure
Roads & corridors
Government
Permitting & policy
EIA consultancies
Impact studies
Conservation
Habitat protection
Water & coastal
Sediment & shorelines
Forestry
Clearing & offsets
ESG & finance
Project due diligence
Why teams choose FlyPix AI
The platform removes the bottlenecks that slow impact assessment: manual footprint digitising, specialist headcount, cloud cover, and tooling that cannot keep pace with the works on the ground.
Footprint in seconds
Quantify disturbance across a full project area in seconds instead of hours of manual digitising — and repeat it on every new pass.
A true no-code platform
Practitioners and project teams run AI impact assessment on their own imagery — no programming, no data-science team, no vendor queue.
Multi-sensor by design
Combine optical, multispectral, SAR, and LiDAR in one workspace and pick the right band for vegetation, water, or terrain.
Defensible evidence
Dated, georeferenced baselines and footprint layers you can stand behind in permitting, regulatory, and compliance review.
What geospatial teams say
From industrial pilots to research labs to environmental missions — see how teams put FlyPix AI to work.
We ran a joint pilot with FlyPix AI in an industrial setting. We were impressed by the dedicated, easy-to-work-with team, their expertise, and how quickly they applied the technology to a novel use case.
FlyPix AI helped us go from idea to proof of concept in record time. The team was responsive, the platform was easy to integrate, and we tested geospatial insights on real property data within days.
FlyPix AI made it remarkably easy to turn drone imagery into actionable results — truly next-gen tech, delivering AI-driven analysis and cloud computing within minutes without complex setups.
What surprised us most was how effortless it was to start. The platform is robust, easy to navigate, and extremely reliable.
FlyPix AI helped us automate land-use classification with incredible precision and speed, saving months of manual work.
Working with FlyPix has significantly elevated the impact of our clean-up missions. We're proud to collaborate with a team that shares our commitment to environmental responsibility.
Turn your imagery into impact evidence.
Create an account and run your first disturbance footprint assessment in minutes — no credit card, no code. Want help scoping your EIA workflow? Our geospatial team will set it up with you.
Environmental impact assessment software, answered
The questions EIA practitioners, planners, and project teams ask before switching to AI-powered impact assessment.
What is environmental impact assessment software?
Do I need coding or GIS expertise to use FlyPix AI?
How does FlyPix AI establish a pre-project baseline?
How does FlyPix AI quantify a disturbance footprint?
Can FlyPix AI assess cumulative impact over time?
How much time can FlyPix AI save versus manual analysis?
Can I try FlyPix AI on my own project?
See the full footprint your project leaves.
Join 10,000+ users automating geospatial assessment with FlyPix AI. Set your project area and watch the AI baseline, quantify, and report every hectare of impact in seconds.