Plan greener cities from above.
FlyPix AI is the no-code green infrastructure planning software that turns satellite and aerial imagery into canopy maps, permeable-surface layers, and heat and flood-risk insight planners can act on — covering thousands of square kilometres and saving up to 99.7% of manual analysis time.
Mapping one borough by hand takes 997 seconds.
FlyPix AI takes 3.
A single borough can hold thousands of trees, gardens, green roofs, and sealed yards spread across hundreds of square kilometres. Manual surveying cannot keep pace with a changing city. FlyPix AI detects and outlines every green and blue asset instantly, so green infrastructure plans stay current with every new capture.
Surveyors and ecologists trace canopy and green space by hand, ward after ward. The work is slow, costly, and out of date before a strategy reaches the committee.
Up to 99.7% time saved. Consistent, georeferenced canopy, permeability, and habitat layers you can track over time and export straight into your GIS.
Canopy, green space, and water intelligence from above, without the code.
Green infrastructure planning software ingests imagery of a city and analyses it to map green and blue assets, measure their reach, and inform nature-based and climate-resilience decisions. FlyPix AI is a no-code platform that uses artificial intelligence to map tree canopy, parks, and green roofs, separate permeable from sealed surfaces, model heat and flood risk, and trace ecological corridors across satellite and aerial imagery. You upload your captures, label a handful of examples, and the AI engine maps the whole study area — turning weeks of manual surveying into minutes of decision-ready insight.
Everything you need to plan green infrastructure
One platform to map canopy, measure permeability, model heat and flood risk, and connect habitat across every area you plan — from a single ward to a whole city-region.
Tree canopy & green-space mapping
Detect and outline trees, parks, gardens, and green roofs to measure canopy cover and open space at street and city scale.
Permeable-vs-sealed surfaces
Classify imagery into permeable and sealed surfaces to quantify run-off risk and target depaving and greening.
Urban heat & canopy equity
Combine canopy and surface layers to surface heat-island hotspots and reveal where green cover is unevenly shared.
SUDS & flood-mitigation siting
Find the catchments and sealed surfaces where rain gardens, swales, and basins deliver the most stormwater benefit.
Ecological corridors & connectivity
Map patches of vegetation and the gaps between them to plan continuous habitat and greener movement networks.
No-code custom models
Train a detector for the exact green or blue asset your strategy needs by labelling a few examples — no programming.
From raw imagery to a green strategy in four steps
A no-code workflow built so planners, ecologists, and officials — not just data scientists — can run production-grade green infrastructure analysis.
Upload your imagery
Bring satellite or aerial captures of your study area in any common format — RGB, multispectral, or LiDAR.
Label what matters
Mark a few examples of each asset you want to map — canopy, green roof, permeable yard. A handful is enough for the engine to learn.
Let the AI map
FlyPix builds a model from your labels and detects, classifies, and measures green and blue assets across the whole area.
Explore & export
Review canopy, permeability, and habitat layers on interactive maps and dashboards, then export vectors to your GIS.
One platform for every sensor over the city
Green infrastructure planning is more than true-colour pictures. FlyPix AI ingests the full range of imagery — distinguish healthy vegetation from sealed ground with multispectral bands, measure canopy height and terrain with LiDAR, and scale from a single ward to a whole city-region with satellite — all in one workspace.
See all supported formats →Built for every team that greens the city
Train models for the exact green and blue assets your strategy cares about and get analysis tailored to your area.
City & regional planning
Canopy & open-space plans
Government & policy
Climate & green strategy
Parks & urban forestry
Canopy & tree inventory
Water & drainage
SUDS & flood mitigation
Environment & climate
Heat & resilience
Ecology & biodiversity
Habitat & corridors
Landscape architecture
Green design & siting
Land administration
Green-asset registers
Real estate & development
Greening & amenity
GIS & mapping
Green-asset basemaps
Why planners choose FlyPix AI
The platform removes the bottlenecks that slow green infrastructure planning: manual surveying, specialist headcount, rigid formats, and tooling that cannot keep pace with a changing city.
Analysis in seconds
Map thousands of trees, green roofs, and sealed surfaces across a full study area in seconds instead of weeks of manual surveying — on every new capture.
A true no-code platform
Planners and ecologists train and run AI models on their own imagery — no programming, no data-science team, no vendor queue.
Multi-sensor by design
Combine optical, multispectral, and LiDAR in one workspace and pick the right data to separate canopy, grass, and sealed ground.
Scales to any city
Map a single ward or sweep an entire city-region at the cadence your climate and green strategy demands.
What geospatial teams say
From industrial pilots to research labs to environmental missions — see how teams put FlyPix AI to work.
We ran a joint pilot with FlyPix AI in an industrial setting. We were impressed by the dedicated, easy-to-work-with team, their expertise, and how quickly they applied the technology to a novel use case.
FlyPix AI helped us go from idea to proof of concept in record time. The team was responsive, the platform was easy to integrate, and we tested geospatial insights on real property data within days.
FlyPix AI made it remarkably easy to turn drone imagery into actionable results — truly next-gen tech, delivering AI-driven analysis and cloud computing within minutes without complex setups.
What surprised us most was how effortless it was to start. The platform is robust, easy to navigate, and extremely reliable.
FlyPix AI helped us automate land-use classification with incredible precision and speed, saving months of manual work.
Working with FlyPix has significantly elevated the impact of our clean-up missions. We're proud to collaborate with a team that shares our commitment to environmental responsibility.
Turn your imagery into greener cities.
Create an account and map your first canopy and permeability layer with AI in minutes — no credit card, no code. Want help scoping your workflow? Our geospatial team will set it up with you.
Green infrastructure planning software, answered
The questions planners, ecologists, and officials ask before switching to AI-powered green infrastructure analysis.
What is green infrastructure planning software?
Do I need coding or GIS expertise to use FlyPix AI?
Can FlyPix AI measure tree canopy cover and equity?
Can FlyPix AI help site SUDS and flood mitigation?
What imagery and data formats does FlyPix AI support?
How much time can FlyPix AI save versus manual analysis?
Can I try FlyPix AI on my own study area?
See where your city is greenest.
Join 10,000+ users automating image analysis with FlyPix AI. Upload your first study area and watch the AI map every tree, roof, and surface in seconds.