Keep the whole site running.
FlyPix AI is the no-code mine maintenance software that turns satellite, drone, and LiDAR captures into haul-road defects, drainage and spillage hotspots, and infrastructure condition you can act on — covering an entire operation and saving up to 99.7% of manual inspection time.
Driving the network by hand takes 997 seconds.
FlyPix AI takes 3.
A working mine keeps tens of kilometres of haul road, drainage, conveyors, and fixed plant in service across hundreds of hectares. Driving the network and logging defects by hand does not scale or keep maintenance ahead of failure. FlyPix AI finds and outlines every defect instantly, so upkeep keeps pace with each new flyover.
Crews drive the haul-road network, note potholes and rutting, and log spillage and drainage by hand. Results are slow, patchy, costly, and out of date before the next shift starts.
Up to 99.7% time saved. Consistent, georeferenced defect detections you can trend over time, prioritise, and export straight into your maintenance and GIS systems.
AI upkeep inspection for roads and infrastructure, without the code.
Mine maintenance software is a tool that ingests and analyses imagery of a mine site to inspect the condition of roads, drainage, and infrastructure and to plan the upkeep that keeps the operation running. FlyPix AI is a no-code platform that uses artificial intelligence to find potholes and rutting on haul roads, flag standing water and blocked drainage, spot dust and spillage, check conveyor and fixed-plant condition, and confirm berm and signage integrity across satellite, drone, LiDAR, and SAR data. You upload your captures, label a handful of examples, and the AI engine builds a custom model and runs the condition check across the whole site — turning days of driving and logging into minutes of decision-ready maintenance insight.
Everything you need to maintain a mine site
One platform to inspect, detect, prioritise, and schedule across every flyover — from a single haul-road segment to the whole road and infrastructure network.
Haul-road condition & potholes
Detect potholes, rutting, corrugation, and edge loss along the haul-road network and grade each segment for repair priority.
Water & drainage on roads
Flag standing water, ponding, and blocked or eroded drainage so crews clear runoff before it cuts up the running surface.
Dust & spillage detection
Spot dust sources, material spillage, and debris on roads and pads, then target watering and clean-up where it counts.
Infrastructure condition checks
Compare repeat captures to surface change in conveyors, pads, workshops, and fixed plant before small faults become downtime.
Equipment & vehicle positions
Detect and map graders, water carts, and service vehicles so maintenance is dispatched to the right place at the right time.
No-code custom models
Train a detector for the exact defect you care about — a pothole, a wash-out, a damaged berm — by labelling a few examples, no programming.
From flyover to work order in four steps
A no-code workflow built so maintenance crews, road foremen, and site engineers — not just data scientists — can run production-grade condition inspection.
Upload your captures
Bring drone, satellite, or aerial imagery plus LiDAR or SAR — any common format works for the road and infrastructure network.
Label what matters
Mark a few examples of the pothole, spillage, or drainage fault you want to track. A handful is enough for the engine to learn.
Let the AI inspect
FlyPix builds a model from your labels and finds, grades, and tracks every defect across the whole site.
Prioritise & export
Review condition on interactive maps and dashboards, then export prioritised defects and work orders to your maintenance system and GIS.
One platform for every sensor over the site
Mine maintenance is more than true-colour pictures. FlyPix AI ingests the full range of remote-sensing data — measure rutting and drainage falls with LiDAR, see through cloud and dust with SAR, and assess water and surface change with multispectral bands — all in one workspace.
See all supported formats →Built for every mine maintenance team
Train models for the exact defects your operation cares about and get condition inspection tailored to your site.
Open-pit mining
Haul roads & ramps
Quarries & aggregates
Roads & pads upkeep
Haul-road management
Potholes & rutting
Drainage & water control
Ponding & runoff
Fixed infrastructure
Conveyors & plant
Berm & bund integrity
Safety structures
Fleet & operations
Service vehicle tracking
Dust & spillage control
Watering & clean-up
Surface & coal mining
Site upkeep
Maintenance planning
Scheduling & priorities
Why mining teams choose FlyPix AI
The platform removes the bottlenecks that slow mine maintenance: manual road drives, reactive repairs, specialist headcount, and tooling that cannot keep pace with new flyovers.
Condition checks in seconds
Find road defects, drainage faults, and infrastructure change across a full site in seconds instead of days of driving — and repeat it on every new flyover.
Fix before it fails
Catch potholes, wash-outs, and damaged berms early from imagery so maintenance stays planned instead of reactive and the site keeps running.
A true no-code platform
Maintenance crews and engineers train and run AI models on their own captures — no programming, no data-science team, no vendor queue.
Scales to any network
Inspect a single ramp or sweep an entire haul-road and infrastructure network at the cadence your operation demands.
What geospatial teams say
From industrial pilots to research labs to environmental missions — see how teams put FlyPix AI to work.
We ran a joint pilot with FlyPix AI in an industrial setting. We were impressed by the dedicated, easy-to-work-with team, their expertise, and how quickly they applied the technology to a novel use case.
FlyPix AI helped us go from idea to proof of concept in record time. The team was responsive, the platform was easy to integrate, and we tested geospatial insights on real property data within days.
FlyPix AI made it remarkably easy to turn drone imagery into actionable results — truly next-gen tech, delivering AI-driven analysis and cloud computing within minutes without complex setups.
What surprised us most was how effortless it was to start. The platform is robust, easy to navigate, and extremely reliable.
FlyPix AI helped us automate land-use classification with incredible precision and speed, saving months of manual work.
Working with FlyPix has significantly elevated the impact of our clean-up missions. We're proud to collaborate with a team that shares our commitment to environmental responsibility.
Turn your flyovers into work orders.
Create an account and run your first AI condition check on a mine capture in minutes — no credit card, no code. Want help scoping your workflow? Our geospatial team will set it up with you.
Mine maintenance software, answered
The questions maintenance crews, road foremen, and site engineers ask before switching to AI-powered condition inspection.
What is mine maintenance software?
Do I need coding or GIS expertise to use FlyPix AI?
Can FlyPix AI detect haul-road defects like potholes and rutting?
How does FlyPix AI help with drainage, dust, and spillage?
What imagery and data does FlyPix AI support for maintenance?
How much time can FlyPix AI save versus manual inspection?
Can I try FlyPix AI on my own mine imagery?
See what your site needs fixed.
Join 10,000+ users automating geospatial analysis with FlyPix AI. Upload your first flyover and watch the AI find, grade, and map every defect in seconds.