Inspect the whole pit from above.
FlyPix AI is the no-code mining inspection software that turns satellite, drone, and LiDAR captures into stockpile volumes, slope and tailings change, and equipment tracking you can act on — covering an entire lease and saving up to 99.7% of manual survey time.
Reviewing a site by hand takes 997 seconds.
FlyPix AI takes 3.
A single mine survey spans benches, haul roads, stockpiles, and tailings facilities across hundreds of hectares. Walking the site or tracing features by hand does not scale or keep crews safe. FlyPix AI measures and outlines everything instantly, so inspection keeps pace with every new flyover.
Surveyors and geotechs walk benches, pace stockpiles, and mark hazards by hand. Results are slow, costly, expose crews to risk, and are out of date before the next blast.
Up to 99.7% time saved. Consistent, georeferenced volumes and change detections you can trend over time and export straight into your mine-planning and GIS tools.
AI mine monitoring and volumetrics, without the code.
Mining inspection software is a tool that ingests and analyses imagery of a mine site to measure volumes, detect change, and monitor safety and compliance across the operation. FlyPix AI is a no-code platform that uses artificial intelligence to measure stockpiles and excavations, flag slope, bench, and tailings movement, track equipment, and surface unauthorized activity across satellite, drone, LiDAR, and SAR data. You upload your captures, label a handful of examples, and the AI engine builds a custom model and runs inspection across the whole lease — turning days of survey work into minutes of decision-ready insight.
Everything you need to inspect a mine site
One platform to measure, detect, track, and monitor across every flyover — from a single bench to an entire mining district.
Stockpile & volume measurement
Measure stockpile, excavation, and overburden volumes from drone or LiDAR captures with georeferenced accuracy and full audit trails.
Slope, bench & tailings change
Compare repeat captures to detect slope movement, bench erosion, and tailings-dam change before it becomes a hazard.
Equipment & asset tracking
Detect and count haul trucks, excavators, and fixed assets, and map haul-road condition across the site in one pass.
Environmental & rehab monitoring
Track revegetation, water ponding, dust, and disturbance footprint to evidence rehabilitation and permit compliance.
Unauthorized-activity detection
Flag illegal digging, encroachment, and activity outside the permitted boundary across satellite and aerial imagery.
No-code custom models
Train a detector for the exact feature you care about — a drill rig, a crack, a spoil pile — by labelling a few examples, no programming.
From flyover to inspection report in four steps
A no-code workflow built so surveyors, geotechs, and mine planners — not just data scientists — can run production-grade inspection.
Upload your captures
Bring drone, satellite, or aerial imagery plus LiDAR or SAR — any common format works.
Label what matters
Mark a few examples of the stockpile, asset, or hazard you want to track. A handful is enough for the engine to learn.
Let the AI inspect
FlyPix builds a model from your labels and measures, detects, and tracks change across the whole site.
Explore & export
Review volumes and change on interactive maps and dashboards, then export vector layers and volumetrics to your mine-planning tools and GIS.
One platform for every sensor over the pit
Mine inspection is more than true-colour pictures. FlyPix AI ingests the full range of remote-sensing data — measure volumes and terrain with LiDAR, see through cloud and dust with SAR, and assess vegetation and water with multispectral bands — all in one workspace.
See all supported formats →Built for every mining team
Train models for the exact features your operation cares about and get inspection tailored to your site.
Open-pit mining
Pits, benches & haul roads
Quarries & aggregates
Stockpiles & volumes
Tailings management
Dam & pond monitoring
Mine safety & geotech
Slope & bench stability
Rehabilitation
Revegetation & closure
Environmental compliance
Disturbance & dust
Fleet & operations
Equipment tracking
Resource & planning
Grade & reconciliation
Coal & minerals
Surface mining
Exploration
Site survey & mapping
Why mining teams choose FlyPix AI
The platform removes the bottlenecks that slow mine inspection: manual surveys, safety exposure, specialist headcount, and tooling that cannot keep pace with new flyovers.
Inspection in seconds
Measure volumes and detect change across a full lease in seconds instead of days of survey work — and repeat it on every new flyover.
Keep crews off the benches
Inspect unstable slopes, tailings dams, and active faces from imagery instead of sending people into hazardous ground.
A true no-code platform
Surveyors and planners train and run AI models on their own captures — no programming, no data-science team, no vendor queue.
Scales to any site
Measure a single stockpile or monitor an entire mining district at the cadence your operation demands.
What geospatial teams say
From industrial pilots to research labs to environmental missions — see how teams put FlyPix AI to work.
We ran a joint pilot with FlyPix AI in an industrial setting. We were impressed by the dedicated, easy-to-work-with team, their expertise, and how quickly they applied the technology to a novel use case.
FlyPix AI helped us go from idea to proof of concept in record time. The team was responsive, the platform was easy to integrate, and we tested geospatial insights on real property data within days.
FlyPix AI made it remarkably easy to turn drone imagery into actionable results — truly next-gen tech, delivering AI-driven analysis and cloud computing within minutes without complex setups.
What surprised us most was how effortless it was to start. The platform is robust, easy to navigate, and extremely reliable.
FlyPix AI helped us automate land-use classification with incredible precision and speed, saving months of manual work.
Working with FlyPix has significantly elevated the impact of our clean-up missions. We're proud to collaborate with a team that shares our commitment to environmental responsibility.
Turn your flyovers into answers.
Create an account and run your first AI inspection on a mine capture in minutes — no credit card, no code. Want help scoping your workflow? Our geospatial team will set it up with you.
Mining inspection software, answered
The questions surveyors, geotechs, and mine planners ask before switching to AI-powered inspection.
What is mining inspection software?
Do I need coding or GIS expertise to use FlyPix AI?
Can FlyPix AI measure stockpile and excavation volumes?
How does FlyPix AI monitor slopes and tailings dams?
What imagery and data does FlyPix AI support for mining?
How much time can FlyPix AI save versus manual inspection?
Can I try FlyPix AI on my own mine imagery?
See what your site is doing.
Join 10,000+ users automating geospatial analysis with FlyPix AI. Upload your first flyover and watch the AI measure, detect, and monitor it in seconds.