Trace pollution back to its source.
FlyPix AI is the no-code pollution source identification software that turns satellite, drone, and multispectral pixels into traced plumes, mapped outfalls, and source-linked spills you can act on — following contamination upstream to the facility behind it and saving up to 99.7% of manual analysis time.
Tracing one plume by hand takes 997 seconds.
FlyPix AI takes 3.
A single scene can hold dozens of discharge plumes, spills, and runoff fans spread across hundreds of square kilometres, each one needing to be followed upstream to the outfall or facility behind it. Tracing pollution to its source by eye does not scale, and a discharge can disperse before the source is ever found. FlyPix AI detects every plume and links it to its origin instantly, so enforcement keeps pace with every new pass.
Analysts trace plume edges and follow them upstream to a suspected source by hand, scene after scene. Results are inconsistent, slow, and out of date before they reach an inspector or enforcement team.
Up to 99.7% time saved. Consistent, georeferenced plumes traced to their outfall or facility, ready to trend over time and export straight into your enforcement case files and GIS.
AI plume tracing and source attribution, without the code.
Pollution source identification software is a tool that ingests and analyses imagery to detect contamination and trace it back to the discharge, spill, or facility that caused it. FlyPix AI is a no-code platform that uses artificial intelligence to find discharge plumes, spills, and runoff, map outfall and effluent signatures, flag illegal dumping, and follow each plume upstream to its origin across satellite, drone, and multispectral imagery. You upload your captures, label a handful of examples, and the AI engine builds a custom model and runs analysis across the whole area of interest — turning hours of manual interpretation into minutes of enforcement-ready insight.
Everything you need to identify pollution sources
One platform to detect, trace, attribute, and monitor pollution across every scene you capture — from a single outfall to an entire river basin.
Discharge & outfall detection
Find and outline discharge plumes and outfall signatures where effluent enters a river, lake, or coastline, ready for inspection.
Plume-to-origin tracing
Follow each plume upstream along its gradient to the outfall, pipe, or facility behind it and pin the suspected source.
Spill & runoff mapping
Detect spills, sediment-laden runoff, and surface contamination and map their extent and direction of travel.
Thermal plume detection
Use thermal infrared to spot warm discharge plumes from industrial outfalls and trace them to their release point.
Illegal dumping & effluent flagging
Flag unpermitted dumping, effluent, and discharge events automatically and build the evidence trail for enforcement.
No-code custom models
Train a detector for the exact pollution signal you care about — a specific effluent, a sediment fan, a thermal plume — by labelling a few examples, no programming.
From raw imagery to traced source in four steps
A no-code workflow built so environmental investigators, regulators, and inspectors — not just data scientists — can run production-grade pollution source identification.
Upload your imagery
Bring satellite, aerial, or drone captures in any common format — RGB, multispectral, hyperspectral, or thermal.
Label what matters
Mark a few examples of the plume, spill, or discharge signature you want to find. A handful is enough for the engine to learn.
Let the AI trace
FlyPix builds a model from your labels and detects, maps, and follows each plume back towards its source across the whole scene.
Explore & export
Review traced plumes, outfalls, and suspected sources on interactive maps and dashboards, then export vector layers to your enforcement tools and GIS.
One platform for every sensor over the source
Pollution source identification is more than true-colour pictures. FlyPix AI ingests the full range of remote-sensing data — read effluent and sediment with multispectral and hyperspectral bands, catch warm industrial discharge with thermal infrared, and trace plumes across whole river basins — all in one workspace.
See all supported formats →Built for every pollution-tracing team
Train models for the exact discharge and spill signatures your mission cares about and get source attribution tailored to your domain.
Environmental agencies
Discharge & dumping alerts
Regulatory enforcement
Permits & violations
Water utilities
Outfalls & source water
Coastal & marine
Spills & nearshore plumes
Agriculture & runoff
Nutrient & sediment sources
Mining & tailings
Effluent & seepage origin
Energy & pipelines
Leaks & discharge points
Industrial compliance
Plant outfall monitoring
Aquaculture
Effluent & site discharge
Research & GIS
Source attribution mapping
Why pollution-tracing teams choose FlyPix AI
The platform removes the bottlenecks that slow pollution source identification: manual plume tracing, specialist headcount, rigid formats, and tooling that cannot keep pace with a discharge that disperses before it is found.
Source attribution in seconds
Detect plumes and trace them to their outfall or facility across a full scene in seconds instead of hours of manual tracing — and repeat it on every new pass.
Catch the culprit, not just the symptom
Follow contamination upstream to the origin behind it so teams act on the source, not only the spreading plume.
A true no-code platform
Environmental investigators and regulators train and run AI models on their own imagery — no programming, no data-science team, no vendor queue.
Scales to any basin
Trace a single outfall or sweep an entire river basin or coastline at the cadence your mission demands.
What geospatial teams say
From industrial pilots to research labs to environmental missions — see how teams put FlyPix AI to work.
We ran a joint pilot with FlyPix AI in an industrial setting. We were impressed by the dedicated, easy-to-work-with team, their expertise, and how quickly they applied the technology to a novel use case.
FlyPix AI helped us go from idea to proof of concept in record time. The team was responsive, the platform was easy to integrate, and we tested geospatial insights on real property data within days.
FlyPix AI made it remarkably easy to turn drone imagery into actionable results — truly next-gen tech, delivering AI-driven analysis and cloud computing within minutes without complex setups.
What surprised us most was how effortless it was to start. The platform is robust, easy to navigate, and extremely reliable.
FlyPix AI helped us automate land-use classification with incredible precision and speed, saving months of manual work.
Working with FlyPix has significantly elevated the impact of our clean-up missions. We're proud to collaborate with a team that shares our commitment to environmental responsibility.
Turn your imagery into traced pollution sources.
Create an account and run your first AI source-tracing analysis on a satellite scene in minutes — no credit card, no code. Want help scoping your workflow? Our geospatial team will set it up with you.
Pollution source identification software, answered
The questions environmental investigators, regulators, and inspectors ask before switching to AI-powered pollution source identification.
What is pollution source identification software?
Do I need coding or GIS expertise to use FlyPix AI?
How does FlyPix AI trace pollution back to its source?
Can FlyPix AI detect illegal dumping and effluent?
What imagery and data does FlyPix AI support for source tracing?
How much time can FlyPix AI save versus manual analysis?
Can I try FlyPix AI on my own imagery?
See where your pollution is coming from.
Join 10,000+ users automating geospatial analysis with FlyPix AI. Upload your first scene and watch the AI trace every plume, spill, and discharge back to its source in seconds.