Map your raw materials from above.
FlyPix AI is the no-code raw material mapping software that turns satellite, aerial, and drone imagery into delineated deposits, classified material types, and a supply map you can build on — covering thousands of square kilometres of ground and saving up to 99.7% of manual mapping time.
Mapping one scene by hand takes 997 seconds.
FlyPix AI takes 3.
A single regional dataset can hold sand and gravel pits, clay beds, aggregate sources, and active quarries across thousands of square kilometres. Delineating them by hand, polygon by polygon, does not scale. FlyPix AI locates and classifies deposits instantly, so your supply map keeps pace with every new capture.
Geologists and planners trace deposit outlines and label material types by hand, site after site. Results are subjective, slow, and out of date before the supply plan is signed off.
Up to 99.7% time saved. Consistent, georeferenced material maps and deposit boundaries you can trend over time and export straight into your GIS and resource database.
AI deposit delineation and material mapping, without the code.
Raw material mapping software is a tool that ingests and analyses imagery of the ground to locate, delineate, and classify surface raw materials and deposits so planners can map supply for construction and industry. FlyPix AI is a no-code platform that uses artificial intelligence to find and outline sand, gravel, aggregate, clay, and ore deposits, identify material types by spectral signature, and map extraction sites and quarries across satellite, aerial, and drone imagery. You upload your captures, label a handful of known sites, and the AI engine builds a custom model and runs analysis across the whole area of interest — turning weeks of mapping into minutes of a decision-ready supply picture.
Everything you need to map raw materials
One platform to locate, delineate, classify, and monitor across every scene you capture — from a single quarry to a regional supply belt.
Deposit location & delineation
Find and outline surface deposits of sand, gravel, aggregate, clay, and ore across imagery in a single pass.
Material type classification
Identify and label material types by their spectral signature so each deposit is mapped to the right resource.
Extraction site & quarry mapping
Map active and disused pits, quarries, and extraction sites to see where supply is being worked at scale.
Spectral indices & ratios
Derive band ratios and spectral indices automatically to separate material groups the eye cannot tell apart.
Supply mapping
Fuse deposits, material types, and sites into a georeferenced supply map for construction and industrial planning.
No-code custom models
Train a detector for the exact material you care about — a particular aggregate, a clay bed, an ore type — by labelling a few examples, no programming.
From raw imagery to supply map in four steps
A no-code workflow built so geologists, planners, and resource teams — not just remote-sensing specialists — can run production-grade material mapping.
Upload your imagery
Bring satellite, aerial, or drone captures in any common format — RGB, multispectral, hyperspectral, SAR, or LiDAR.
Label what matters
Mark a few known deposits, material types, or extraction sites. A handful is enough for the engine to learn.
Let the AI map
FlyPix builds a model from your labels and locates deposits, classifies material types, and maps sites across the whole scene.
Explore & export
Review the material map and deposit boundaries on interactive maps and dashboards, then export georeferenced layers to your GIS and resource database.
One platform for every band over the ground
Raw material mapping is more than true-colour pictures. FlyPix AI ingests the full range of remote-sensing data — separate material groups with hyperspectral and multispectral bands, see through cloud and vegetation with SAR, and read terrain and pit volumes with LiDAR — all in one workspace.
See all supported formats →Built for every supply-driven team
Train models for the exact materials your project cares about and get mapping tailored to your supply chain.
Aggregates & quarrying
Sand, gravel & crushed rock
Construction
Material supply mapping
Cement & clays
Clay & limestone sources
Surface mining
Ore & deposit delineation
Resource planning
Regional supply mapping
Civil engineering
Borrow & fill sources
Geological survey
Surface material mapping
Remote sensing & GIS
Spectral analysis
Materials industry
Supply chain mapping
Environment & land
Site change monitoring
Why supply teams choose FlyPix AI
The platform removes the bottlenecks that slow material mapping: manual delineation, specialist headcount, rigid formats, and tooling that cannot keep pace with new captures.
Mapping in seconds
Locate and delineate deposits across a full scene in seconds instead of weeks of manual tracing — and repeat it on every new capture.
A true no-code platform
Geologists and planners train and run AI models on their own imagery — no programming, no remote-sensing team, no vendor queue.
Multi-sensor by design
Combine optical, multispectral, hyperspectral, SAR, and LiDAR in one workspace and pick the right bands for the material you are mapping.
Scales to any area
Zoom in on a single quarry or sweep an entire supply region at the cadence your project demands.
What geospatial teams say
From industrial pilots to research labs to environmental missions — see how teams put FlyPix AI to work.
We ran a joint pilot with FlyPix AI in an industrial setting. We were impressed by the dedicated, easy-to-work-with team, their expertise, and how quickly they applied the technology to a novel use case.
FlyPix AI helped us go from idea to proof of concept in record time. The team was responsive, the platform was easy to integrate, and we tested geospatial insights on real property data within days.
FlyPix AI made it remarkably easy to turn drone imagery into actionable results — truly next-gen tech, delivering AI-driven analysis and cloud computing within minutes without complex setups.
What surprised us most was how effortless it was to start. The platform is robust, easy to navigate, and extremely reliable.
FlyPix AI helped us automate land-use classification with incredible precision and speed, saving months of manual work.
Working with FlyPix has significantly elevated the impact of our clean-up missions. We're proud to collaborate with a team that shares our commitment to environmental responsibility.
Turn your imagery into a supply map.
Create an account and run your first AI analysis on a scene in minutes — no credit card, no code. Want help scoping your workflow? Our geospatial team will set it up with you.
Raw material mapping software, answered
The questions geologists, planners, and resource teams ask before switching to AI-powered material mapping.
What is raw material mapping software?
Do I need coding or remote-sensing expertise to use FlyPix AI?
How does FlyPix AI identify material types?
Can FlyPix AI delineate deposits and extraction sites?
What imagery and data does FlyPix AI support for material mapping?
How much time can FlyPix AI save versus manual mapping?
Can I try FlyPix AI on my own imagery?
See what your ground is holding.
Join 10,000+ users automating geospatial analysis with FlyPix AI. Upload your first scene and watch the AI locate deposits, classify materials, and map supply in seconds.