Estimate every cubic metre from a single flyover.
FlyPix AI is the no-code resource estimation software that turns drone, photogrammetry, LiDAR, and satellite captures into accurate volumes, tonnage, and deposit extent you can act on — quantifying an entire pit or site at once and saving up to 99.7% of manual survey time.
Estimating a site by hand takes 997 seconds.
FlyPix AI takes 3.
A working pit or deposit can span hundreds of metres of irregular surface, with material added and drawn down between every visit. Estimating quantities with a GPS rover and spreadsheets does not scale and is stale before the next blast or haul. FlyPix AI builds a surface model and computes every volume and extent instantly, so estimates keep pace with every new flight.
Surveyors walk the working faces with a GPS rover, log points by hand, and stitch volumes section by section. Results are slow, expose crews to unstable ground, and are out of date before they reach a planner.
Up to 99.7% time saved. Consistent, georeferenced volumes, tonnage, and extent you can trend over time, reconcile against extraction records, and export straight into your reporting and GIS systems.
AI volume and quantity estimation, without the code.
Resource estimation software is a tool that turns captures of a site into accurate volumes, tonnage, and extent for the material and deposits on the ground. FlyPix AI is a no-code platform that uses artificial intelligence to map the extent of each deposit or worked area, build a surface model, estimate its volume against a base plane or prior terrain, and convert it to tonnage across drone, photogrammetry, LiDAR, and satellite captures. You upload your flight, confirm the boundaries that matter, and the engine estimates georeferenced quantities across the whole site — turning a day of GPS survey into minutes of decision-ready figures.
Everything you need to estimate resources
One platform to map, model, calculate, and reconcile across every flight — from a single working face to an entire mine or quarry.
Automated volume estimation
Estimate the volume of extracted material or a deposit against a flat base, a custom boundary, or a prior surface — with georeferenced accuracy and a full audit trail.
Tonnage estimation
Apply per-material density to each volume to convert cubic metres into tonnes, so estimates line up directly with your extraction and reporting records.
Deposit extent & area
Map and measure the area and footprint of deposits, worked benches, and features to quantify how far a resource extends across a site.
Surface differencing over time
Compare repeat flights to estimate exactly how much material was extracted or added between dates — no manual stitching.
Terrain & surface models
Generate digital terrain and surface models from photogrammetry or LiDAR to underpin every volume estimate and reconciliation.
No-code custom models
Train a detector for the exact material or feature you estimate — ore, overburden, aggregate, spoil, fill — by labelling a few examples, no programming.
From flight to resource report in four steps
A no-code workflow built so surveyors, mine planners, and estimators — not just data scientists — can run production-grade volumetrics.
Upload your capture
Bring a drone flight, photogrammetry block, aerial set, or LiDAR scan — any common format works.
Confirm the boundaries
Mark the extent of each deposit or worked area, or label a few examples of the material; a handful is enough for the engine to learn the rest.
Let the AI estimate
FlyPix builds a surface model, maps each deposit, and estimates volume, tonnage, and extent across the whole site.
Reconcile & export
Review volumes, extent, and change on interactive maps and dashboards, then export volumetrics to your reporting and GIS tools.
One platform for every way you capture a site
Resource estimation is more than a rover and a spreadsheet. FlyPix AI ingests the full range of capture methods — build precise surfaces from drone photogrammetry, measure dense terrain with LiDAR, and track large sites with aerial and satellite imagery — all in one workspace.
See all supported formats →Built for every team that quantifies material
Train models for the exact materials your operation extracts and get estimates tailored to your site.
Mining
Ore & overburden volumes
Quarries & aggregates
Sand, gravel & rock
Construction
Earthworks & cut-fill
Ports & terminals
Bulk material throughput
Coal & energy
Coal & biomass reserves
Reporting & finance
Reserves & reconciliation
Agriculture
Grain & feedstock volumes
Waste & recycling
Landfill & material volumes
Survey & drone services
As-a-service estimation
Civil & infrastructure
Dredging & spoil volumes
Why operators choose FlyPix AI
The platform removes the bottlenecks that slow resource estimation: manual GPS surveys, safety exposure on unstable ground, specialist headcount, and tooling that cannot keep pace with new flights.
Estimates in seconds
Quantify a whole site in seconds instead of a day of GPS survey — and repeat it on every new flight to keep estimates live.
Keep crews off the faces
Estimate volumes from steep and unstable working faces from imagery instead of sending surveyors to walk them with a rover.
A true no-code platform
Surveyors and planners run AI volumetrics on their own captures — no programming, no data-science team, no vendor queue.
Scales to any site
Estimate a single working face or a whole mine and quarry at the cadence your operation demands.
What geospatial teams say
From industrial pilots to research labs to environmental missions — see how teams put FlyPix AI to work.
We ran a joint pilot with FlyPix AI in an industrial setting. We were impressed by the dedicated, easy-to-work-with team, their expertise, and how quickly they applied the technology to a novel use case.
FlyPix AI helped us go from idea to proof of concept in record time. The team was responsive, the platform was easy to integrate, and we tested geospatial insights on real property data within days.
FlyPix AI made it remarkably easy to turn drone imagery into actionable results — truly next-gen tech, delivering AI-driven analysis and cloud computing within minutes without complex setups.
What surprised us most was how effortless it was to start. The platform is robust, easy to navigate, and extremely reliable.
FlyPix AI helped us automate land-use classification with incredible precision and speed, saving months of manual work.
Working with FlyPix has significantly elevated the impact of our clean-up missions. We're proud to collaborate with a team that shares our commitment to environmental responsibility.
Turn your flights into resource figures.
Create an account and run your first AI volume estimate on a site capture in minutes — no credit card, no code. Want help scoping your workflow? Our geospatial team will set it up with you.
Resource estimation software, answered
The questions surveyors, planners, and estimators ask before switching to AI-powered volumetrics.
What is resource estimation software?
Do I need coding or GIS expertise to use FlyPix AI?
How does FlyPix AI estimate material volume?
Can FlyPix AI estimate tonnage and reconcile extraction?
What captures and data formats does FlyPix AI support?
How much time can FlyPix AI save versus manual estimation?
Can I try FlyPix AI on my own site captures?
See what your site is really worth in volume.
Join 10,000+ users automating geospatial analysis with FlyPix AI. Upload your first flight and watch the AI estimate, map, and reconcile every cubic metre in seconds.