Measure every pile from a single flyover.
FlyPix AI is the no-code stockpile measurement software that turns drone, photogrammetry, and LiDAR captures into accurate volumes, tonnage, and inventory change you can act on — measuring an entire yard at once and saving up to 99.7% of manual survey time.
Measuring a yard by hand takes 997 seconds.
FlyPix AI takes 3.
A bulk-storage yard can hold dozens of piles spread across hundreds of metres, each with an irregular surface no tape or wheel can capture. Walking the stockpiles with GPS does not scale and is dangerous on steep faces. FlyPix AI builds a surface model and computes every volume instantly, so inventory keeps pace with every new flight.
Surveyors climb piles with a GPS rover, log points by hand, and stitch volumes pile by pile. Results are slow, expose crews to slips and slides, and are stale before the next delivery arrives.
Up to 99.7% time saved. Consistent, georeferenced volumes and tonnage you can trend over time, reconcile against records, and export straight into your inventory and GIS systems.
AI volume calculation and inventory, without the code.
Stockpile measurement software is a tool that turns captures of a storage site into accurate volumes, tonnage, and inventory change for every pile on the ground. FlyPix AI is a no-code platform that uses artificial intelligence to detect each stockpile, build a surface model, calculate its volume against a base plane or prior terrain, and convert it to tonnage across drone, photogrammetry, LiDAR, and satellite captures. You upload your flight, confirm the toe of each pile, and the engine computes georeferenced volumes across the whole yard — turning a day of GPS survey into minutes of audit-ready inventory.
Everything you need to measure stockpiles
One platform to detect, model, calculate, and reconcile across every flight — from a single aggregate pile to an entire bulk-storage terminal.
Automated volume calculation
Compute the volume of every pile against a flat base, a custom toe, or a prior surface — with georeferenced accuracy and a full audit trail.
Tonnage estimation
Apply per-material density to each volume to convert cubic metres into tonnes, so volumes line up directly with your inventory records.
Surface differencing over time
Compare repeat flights to measure exactly how much material was added or drawn down between dates — no manual stitching.
Multi-pile detection
Detect and separate every stockpile across a crowded yard in one pass, even where piles merge or share a base.
Terrain & surface models
Generate digital terrain and surface models from photogrammetry or LiDAR to underpin every volume and reconciliation.
No-code custom models
Train a detector for the exact material you stock — sand, coal, ore, woodchip, scrap — by labelling a few examples, no programming.
From flight to inventory report in four steps
A no-code workflow built so surveyors, yard managers, and inventory auditors — not just data scientists — can run production-grade volumetrics.
Upload your capture
Bring a drone flight, photogrammetry block, aerial set, or LiDAR scan — any common format works.
Confirm the toes
Mark the base of each pile, or label a few examples of the material; a handful is enough for the engine to learn the rest.
Let the AI measure
FlyPix builds a surface model, detects every stockpile, and calculates volume and tonnage across the whole yard.
Reconcile & export
Review volumes and change on interactive maps and dashboards, then export volumetrics to your inventory, ERP, and GIS tools.
One platform for every way you capture a pile
Stockpile measurement is more than a tape and a wheel. FlyPix AI ingests the full range of capture methods — build precise surfaces from drone photogrammetry, measure dense terrain with LiDAR, and check large yards with aerial and satellite imagery — all in one workspace.
See all supported formats →Built for every team that counts material
Train models for the exact materials your operation stocks and get volumetrics tailored to your site.
Mining
Ore & overburden piles
Quarries & aggregates
Sand, gravel & rock
Construction
Earthworks & cut-fill
Ports & terminals
Bulk-storage yards
Coal & energy
Coal & biomass piles
Inventory & finance
Audits & reconciliation
Agriculture
Grain & feedstock heaps
Waste & recycling
Scrap & material yards
Survey & drone services
As-a-service volumes
Logistics & supply
Yard stock tracking
Why operators choose FlyPix AI
The platform removes the bottlenecks that slow stockpile measurement: manual GPS surveys, safety exposure on steep faces, specialist headcount, and tooling that cannot keep pace with new flights.
Volumes in seconds
Measure every pile in a yard in seconds instead of a day of GPS survey — and repeat it on every new flight to keep inventory live.
Keep crews off the piles
Measure steep and unstable stockpiles from imagery instead of sending surveyors to climb them with a rover.
A true no-code platform
Surveyors and yard managers run AI volumetrics on their own captures — no programming, no data-science team, no vendor queue.
Scales to any yard
Measure a single aggregate pile or audit an entire bulk-storage terminal at the cadence your operation demands.
What geospatial teams say
From industrial pilots to research labs to environmental missions — see how teams put FlyPix AI to work.
We ran a joint pilot with FlyPix AI in an industrial setting. We were impressed by the dedicated, easy-to-work-with team, their expertise, and how quickly they applied the technology to a novel use case.
FlyPix AI helped us go from idea to proof of concept in record time. The team was responsive, the platform was easy to integrate, and we tested geospatial insights on real property data within days.
FlyPix AI made it remarkably easy to turn drone imagery into actionable results — truly next-gen tech, delivering AI-driven analysis and cloud computing within minutes without complex setups.
What surprised us most was how effortless it was to start. The platform is robust, easy to navigate, and extremely reliable.
FlyPix AI helped us automate land-use classification with incredible precision and speed, saving months of manual work.
Working with FlyPix has significantly elevated the impact of our clean-up missions. We're proud to collaborate with a team that shares our commitment to environmental responsibility.
Turn your flights into inventory.
Create an account and run your first AI volume calculation on a stockpile capture in minutes — no credit card, no code. Want help scoping your workflow? Our geospatial team will set it up with you.
Stockpile measurement software, answered
The questions surveyors, yard managers, and auditors ask before switching to AI-powered volumetrics.
What is stockpile measurement software?
Do I need coding or GIS expertise to use FlyPix AI?
How does FlyPix AI calculate stockpile volume?
Can FlyPix AI estimate tonnage and reconcile inventory?
What captures and data formats does FlyPix AI support?
How much time can FlyPix AI save versus manual measurement?
Can I try FlyPix AI on my own stockpile captures?
See what your yard is really holding.
Join 10,000+ users automating geospatial analysis with FlyPix AI. Upload your first flight and watch the AI measure, count, and reconcile every pile in seconds.