Watch every tailings dam from orbit.
FlyPix AI is the no-code tailings dam monitoring software that turns satellite, drone, and SAR captures into embankment deformation, freeboard, pond extent, and seepage signals you can act on — across your whole portfolio of storage facilities and saving up to 99.7% of manual review time.
Reviewing one tailings facility by hand takes 997 seconds.
FlyPix AI takes 3.
A single tailings storage facility spans embankments, beaches, decant ponds, and seepage zones across hundreds of hectares — and the warning signs of failure are millimetres of movement and creeping wet areas. Manual inspection cannot catch them in time. FlyPix AI measures and outlines change instantly, so safety surveillance keeps pace with every new capture.
Geotechs walk crests, read instruments, and compare photos by hand, facility after facility. Subtle deformation and seepage go unseen, results lag the next rainfall, and crews are exposed on unstable embankments.
Up to 99.7% time saved. Consistent, georeferenced deformation, freeboard, and seepage signals you can trend over time and export straight into your dashboards, GIS, and GISTM reporting.
AI surveillance for tailings storage facilities, without the code.
Tailings dam monitoring software is a tool that ingests and analyses imagery of a tailings storage facility to track embankment movement, water levels, and seepage so failure risk can be caught early. FlyPix AI is a no-code platform that uses artificial intelligence to measure embankment deformation, monitor freeboard and pond extent, detect seepage and wet areas, and flag beach and crest change across satellite, drone, LiDAR, and SAR data. You upload your captures, label a handful of examples, and the AI engine builds a custom model and runs surveillance across every facility — turning days of manual safety review into minutes of decision-ready insight.
Everything you need to monitor a tailings dam
One platform to measure, detect, and track across every capture — from a single embankment to an entire portfolio of storage facilities.
Embankment deformation tracking
Detect millimetre-scale ground movement and embankment settlement by comparing repeat captures, so creeping deformation is caught long before it becomes a hazard.
Freeboard & pond-extent monitoring
Track decant pond water extent and freeboard against the crest over time, flagging rising water and shrinking margins before storms or overtopping.
Seepage & wet-area detection
Surface emerging seepage, damp toes, and saturated ground on the downstream face using multispectral and SAR signatures the eye misses.
Beach, crest & berm change
Measure beach width, crest position, and berm geometry across captures with georeferenced accuracy and a full audit trail.
Early-warning alerts
Set thresholds on movement, water rise, or wet-area growth and get flagged automatically as conditions trend toward failure risk.
No-code custom models
Train a detector for the exact signal you care about — a seepage scar, a crest crack, a slumped berm — by labelling a few examples, no programming.
From capture to safety signal in four steps
A no-code workflow built so geotechs, dam-safety engineers, and tailings stewards — not just data scientists — can run production-grade surveillance.
Upload your captures
Bring satellite, drone, or aerial imagery plus LiDAR or SAR for each tailings facility — any common format works.
Label what matters
Mark a few examples of the embankment, pond, or seepage signal you want to watch. A handful is enough for the engine to learn.
Let the AI monitor
FlyPix builds a model from your labels and measures deformation, water extent, and seepage change across every facility.
Explore & report
Review movement and risk on interactive maps and dashboards, then export georeferenced layers to your GIS and GISTM compliance reports.
One platform for every sensor over the dam
Tailings surveillance is more than true-colour pictures. FlyPix AI ingests the full range of remote-sensing data — measure millimetre deformation with InSAR and SAR through cloud, rain, and darkness, map terrain and freeboard with LiDAR, and reveal seepage and saturation with multispectral bands — all in one workspace.
See all supported formats →Built for every dam-safety team
Train models for the exact signals your facilities demand and get surveillance tailored to your storage method and risk profile.
Tailings storage facilities
Embankments & ponds
Dam safety & geotech
Stability & deformation
Open-pit & surface mining
Whole-of-site monitoring
Coal & minerals
Slurry & residue dams
Risk & compliance
GISTM reporting
Environmental monitoring
Seepage & water quality
Rehabilitation & closure
Capped & legacy dams
Engineers of record
Independent surveillance
Insurance & assurance
Portfolio risk review
Regulators & authorities
Wide-area oversight
Why dam-safety teams choose FlyPix AI
The platform removes the bottlenecks that slow tailings surveillance: manual inspections, safety exposure on unstable embankments, specialist headcount, and tooling that cannot keep pace with new captures.
Surveillance in seconds
Measure deformation, freeboard, and seepage across a full portfolio in seconds instead of days of manual review — and repeat it on every new capture.
Keep crews off the embankment
Watch unstable crests, saturated faces, and rising ponds from imagery instead of sending people onto ground that could fail.
A true no-code platform
Geotechs and dam stewards train and run AI models on their own captures — no programming, no data-science team, no vendor queue.
Scales to every facility
Watch a single embankment or monitor an entire portfolio of storage facilities at the cadence your safety programme demands.
What geospatial teams say
From industrial pilots to research labs to environmental missions — see how teams put FlyPix AI to work.
We ran a joint pilot with FlyPix AI in an industrial setting. We were impressed by the dedicated, easy-to-work-with team, their expertise, and how quickly they applied the technology to a novel use case.
FlyPix AI helped us go from idea to proof of concept in record time. The team was responsive, the platform was easy to integrate, and we tested geospatial insights on real property data within days.
FlyPix AI made it remarkably easy to turn drone imagery into actionable results — truly next-gen tech, delivering AI-driven analysis and cloud computing within minutes without complex setups.
What surprised us most was how effortless it was to start. The platform is robust, easy to navigate, and extremely reliable.
FlyPix AI helped us automate land-use classification with incredible precision and speed, saving months of manual work.
Working with FlyPix has significantly elevated the impact of our clean-up missions. We're proud to collaborate with a team that shares our commitment to environmental responsibility.
Turn your captures into early warning.
Create an account and run your first AI surveillance pass on a tailings facility in minutes — no credit card, no code. Want help scoping your dam-safety workflow? Our geospatial team will set it up with you.
Tailings dam monitoring software, answered
The questions geotechs, dam-safety engineers, and tailings stewards ask before switching to AI-powered surveillance.
What is tailings dam monitoring software?
Do I need coding or GIS expertise to use FlyPix AI?
How does FlyPix AI detect embankment deformation and ground movement?
Can FlyPix AI monitor freeboard, pond extent, and seepage?
What imagery and data does FlyPix AI support for tailings dams?
Does FlyPix AI support GISTM and dam-safety compliance reporting?
How much time can FlyPix AI save versus manual monitoring?
See what your tailings dam is doing.
Join 10,000+ users automating geospatial analysis with FlyPix AI. Upload your first capture and watch the AI measure deformation, freeboard, and seepage in seconds.