Manage every tailings facility from orbit.
FlyPix AI is the no-code tailings management software that turns satellite, drone, and SAR captures into storage capacity, deposition, water balance, and rehabilitation insight you can act on — across your whole portfolio of storage facilities and saving up to 99.7% of manual review time.
Auditing one tailings facility by hand takes 997 seconds.
FlyPix AI takes 3.
A single tailings storage facility spans deposition beaches, decant ponds, dry-stack lifts, dust-prone surfaces, and rehabilitation zones across hundreds of hectares — and remaining airspace, water balance, and closure progress all move every month. Manual surveys and spreadsheets cannot keep up. FlyPix AI measures and outlines change instantly, so operations and stewardship keep pace with every new capture.
Planners commission surveys, reconcile volumes in spreadsheets, and compare photos by hand, facility after facility. Capacity forecasts drift, water and dust go untracked between visits, and portfolio governance lags the next deposition cycle.
Up to 99.7% time saved. Consistent, georeferenced capacity, beach, water, and rehabilitation signals you can trend over time and export straight into your dashboards, GIS, and GISTM stewardship reporting.
AI operations intelligence for tailings storage facilities, without the code.
Tailings management software is a tool that ingests and analyses imagery of a tailings storage facility to track storage capacity, deposition, water balance, and rehabilitation so the facility can be operated and governed safely across its life. FlyPix AI is a no-code platform that uses artificial intelligence to measure remaining airspace, monitor deposition and beach development, track pond extent and water balance, map dust and dry-stack progress, and follow progressive rehabilitation across satellite, drone, LiDAR, and SAR data. You upload your captures, label a handful of examples, and the AI engine builds a custom model and runs analysis across every facility — turning days of manual surveys and reporting into minutes of decision-ready insight.
Everything you need to manage a tailings facility
One platform to measure, plan, and govern across every capture — from a single deposition cell to an entire portfolio of storage facilities.
Capacity & airspace tracking
Measure deposited volume and remaining airspace over time from repeat captures, so capacity forecasts and lift planning stay grounded in what the facility is actually doing.
Deposition & beach development
Track spigot beaches, deposition fronts, and beach slope across captures with georeferenced accuracy, so cycling and beach management follow the plan.
Water balance & pond extent
Map decant pond extent and supernatant water over time to keep the site water balance, return flows, and storm allowance under control.
Dust & dry-stack surface mapping
Spot dry, dust-prone beaches and track dry-stack lifts and surface moisture so dust suppression and placement stay ahead of conditions.
Progressive rehabilitation
Monitor capping, revegetation, and closure progress across the facility to evidence progressive rehabilitation and reduce long-term liability.
No-code custom models
Train a detector for the exact feature you care about — a deposition front, a dust hotspot, a revegetated cell — by labelling a few examples, no programming.
From capture to operations decision in four steps
A no-code workflow built so tailings planners, operations engineers, and TSF stewards — not just data scientists — can run production-grade analysis.
Upload your captures
Bring satellite, drone, or aerial imagery plus LiDAR or SAR for each tailings facility — any common format works.
Label what matters
Mark a few examples of the beach, pond, dust zone, or rehabilitation cell you want to track. A handful is enough for the engine to learn.
Let the AI measure
FlyPix builds a model from your labels and measures capacity, deposition, water extent, and rehabilitation change across every facility.
Plan & report
Review capacity and progress on interactive maps and dashboards, then export georeferenced layers to your GIS and GISTM stewardship reports.
One platform for every sensor over the facility
Tailings management is more than true-colour pictures. FlyPix AI ingests the full range of remote-sensing data — measure volume, airspace, and beach slope with LiDAR, track ponds and deposition through cloud, rain, and darkness with SAR, and reveal moisture, dust, and revegetation with multispectral bands — all in one workspace.
See all supported formats →Built for every tailings team
Train models for the exact signals your facilities demand and get analysis tailored to your storage method and life-of-asset stage.
Tailings storage facilities
Beaches, ponds & lifts
Open-pit & surface mining
Whole-of-site operations
Coal & minerals
Slurry & residue storage
Mine planning & operations
Capacity & deposition
Governance & compliance
GISTM stewardship
Environmental monitoring
Dust & water balance
Rehabilitation & closure
Capping & revegetation
Risk & assurance
Portfolio oversight
Tailings consultants
Multi-site review
Regulators & authorities
Wide-area oversight
Why tailings teams choose FlyPix AI
The platform removes the bottlenecks that slow tailings management: ad-hoc surveys, spreadsheet reconciliation, specialist headcount, and tooling that cannot keep pace with new captures or scale across a portfolio.
Operations insight in seconds
Measure capacity, deposition, water, and rehabilitation across a full portfolio in seconds instead of days of manual surveys — and repeat it on every new capture.
Governance you can evidence
Produce consistent, georeferenced records of capacity, water balance, and closure progress that stand up to GISTM stewardship and board-level review.
A true no-code platform
Planners and TSF stewards train and run AI models on their own captures — no programming, no data-science team, no vendor queue.
Scales across the portfolio
Manage a single facility or govern an entire portfolio of storage facilities at the cadence your operations and stewardship demand.
What geospatial teams say
From industrial pilots to research labs to environmental missions — see how teams put FlyPix AI to work.
We ran a joint pilot with FlyPix AI in an industrial setting. We were impressed by the dedicated, easy-to-work-with team, their expertise, and how quickly they applied the technology to a novel use case.
FlyPix AI helped us go from idea to proof of concept in record time. The team was responsive, the platform was easy to integrate, and we tested geospatial insights on real property data within days.
FlyPix AI made it remarkably easy to turn drone imagery into actionable results — truly next-gen tech, delivering AI-driven analysis and cloud computing within minutes without complex setups.
What surprised us most was how effortless it was to start. The platform is robust, easy to navigate, and extremely reliable.
FlyPix AI helped us automate land-use classification with incredible precision and speed, saving months of manual work.
Working with FlyPix has significantly elevated the impact of our clean-up missions. We're proud to collaborate with a team that shares our commitment to environmental responsibility.
Turn your captures into operations intelligence.
Create an account and run your first AI analysis pass on a tailings facility in minutes — no credit card, no code. Want help scoping your tailings management workflow? Our geospatial team will set it up with you.
Tailings management software, answered
The questions tailings planners, operations engineers, and TSF stewards ask before switching to AI-powered analysis.
What is tailings management software?
How is this different from tailings dam monitoring?
Do I need coding or GIS expertise to use FlyPix AI?
Can FlyPix AI track storage capacity, remaining airspace, and deposition?
Can FlyPix AI monitor water balance, dust, and rehabilitation?
Does FlyPix AI support GISTM stewardship and portfolio governance?
How much time can FlyPix AI save versus manual analysis?
See what your tailings facility is doing.
Join 10,000+ users automating geospatial analysis with FlyPix AI. Upload your first capture and watch the AI measure capacity, water balance, and rehabilitation in seconds.