Inspect every asset from the drone.
FlyPix AI is the no-code UAV aerial inspection software that turns drone visual and thermal imagery into defect findings, component counts, and condition reports — covering whole solar farms, wind fleets, and tower portfolios and saving up to 99.7% of manual inspection time.
Reviewing one drone flight by hand takes 997 seconds.
FlyPix AI takes 3.
A single UAV sortie can return thousands of frames across an entire site — every panel, blade, and joint waiting to be checked. Manual review never keeps pace. FlyPix AI inspects the whole capture at once, so defects and hotspots surface before they cost output.
Technicians scrub through drone footage frame by frame, asset after asset. Coverage is slow, findings drift between reviewers, and faults are caught late.
Up to 99.7% time saved. Consistent, georeferenced defect findings you can compare flight to flight and export straight into your asset-management system.
Drone-captured asset intelligence, without the code.
UAV aerial inspection software ingests imagery captured by drones and analyses it to detect defects, measure condition, and flag change across physical assets. FlyPix AI is a no-code platform that uses artificial intelligence to find faults, count components, and track degradation across drone visual and thermal imagery of solar panels, wind turbines, towers, roofs, bridges, and facades. You upload each flight, label a few examples, and the AI engine inspects every frame — turning days of footage review into minutes of decision-ready insight.
Everything you need to inspect from the air
One platform to detect defects, read thermal anomalies, count components, and compare flights across every asset a drone can reach — from a single roof to a whole renewable site.
Defect & damage detection
Find cracks, corrosion, delamination, soiling, and physical damage across drone imagery in a single automated pass.
Thermal hotspot detection
Read thermal captures to surface overheating panels, faulty cells, and electrical hotspots a visual sweep would miss.
Missing component flagging
Detect missing bolts, fasteners, modules, and fittings so incomplete or failing assets are caught early.
Before & after comparison
Align repeat inspections of the same asset to surface what degraded, cracked, or appeared between flights — automatically.
Measurement & counting
Count panels, modules, and components and measure affected areas with georeferenced accuracy.
No-code custom models
Train a detector for the exact defect or component you care about by labelling a few examples — no programming.
From drone flight to inspection in four steps
A no-code workflow built so inspectors, maintenance crews, and site operators — not just data scientists — can run production-grade inspection.
Upload your flight
Bring drone visual and thermal captures of your assets in any common format — RGB, multispectral, or thermal.
Label what matters
Mark a few examples of the defect or component you want to find. A handful is enough for the engine to learn.
Let the AI inspect
FlyPix builds a model from your labels and detects, classifies, and measures across every frame in the capture.
Explore & export
Review findings on interactive maps, then export georeferenced results to your GIS or asset-management software.
One platform for every sensor on the drone
UAV inspection is more than true-colour pictures. FlyPix AI ingests the full range of drone payloads — spot failing cells with thermal, reveal stress with multispectral, and capture fine detail in high-resolution RGB — then ties every flight together in one workspace.
See all supported formats →Built for every asset a drone can reach
Train models for the exact defects and components your assets care about and get inspection tailored to your operation.
Solar farms
Panels & hotspots
Wind turbines
Blades & nacelles
Telecom towers
Masts & antennas
Roofs & facades
Damage & condition
Bridges
Joints & structures
Power lines
Lines & insulators
Industrial sites
Plant & equipment
Ports & maritime
Cranes & terminals
Utilities
Asset-wide condition
Asset owners
Portfolio inspection
Why operators choose FlyPix AI
The platform removes the bottlenecks that slow drone inspection: manual footage review, specialist headcount, rigid formats, and tooling that cannot keep pace with every flight.
Inspection in seconds
Review thousands of assets across a full flight in seconds instead of days of manual footage review — and repeat it every cycle.
A true no-code platform
Inspectors and maintenance crews train and run AI models on their own drone imagery — no programming, no data-science team.
Visual & thermal together
Combine high-resolution RGB and thermal captures in one workspace and pick the right payload for the defect.
Scales to any fleet
Zoom into a single roof or sweep an entire solar farm or wind fleet at the cadence your maintenance demands.
What geospatial teams say
From industrial pilots to research labs to environmental missions — see how teams put FlyPix AI to work.
We ran a joint pilot with FlyPix AI in an industrial setting. We were impressed by the dedicated, easy-to-work-with team, their expertise, and how quickly they applied the technology to a novel use case.
FlyPix AI helped us go from idea to proof of concept in record time. The team was responsive, the platform was easy to integrate, and we tested geospatial insights on real property data within days.
FlyPix AI made it remarkably easy to turn drone imagery into actionable results — truly next-gen tech, delivering AI-driven analysis and cloud computing within minutes without complex setups.
What surprised us most was how effortless it was to start. The platform is robust, easy to navigate, and extremely reliable.
FlyPix AI helped us automate land-use classification with incredible precision and speed, saving months of manual work.
Working with FlyPix has significantly elevated the impact of our clean-up missions. We're proud to collaborate with a team that shares our commitment to environmental responsibility.
Turn your drone flights into inspections.
Create an account and run your first AI inspection on a drone flight in minutes — no credit card, no code. Want help scoping your workflow? Our geospatial team will set it up with you.
UAV aerial inspection software, answered
The questions inspectors, maintenance crews, and operators ask before switching to AI-powered drone inspection.
What is UAV aerial inspection software?
Do I need coding or GIS expertise to use FlyPix AI?
What drone imagery and data formats does FlyPix AI support?
What kinds of assets and defects can FlyPix AI inspect?
Can FlyPix AI compare repeat inspections of the same asset?
How much time can FlyPix AI save versus manual inspection?
Can I try FlyPix AI on my own drone flights?
See what your drone footage is hiding.
Join 10,000+ users automating image analysis with FlyPix AI. Upload your first flight and watch the AI flag every defect and hotspot in seconds.